Aerogeneradores de minieolica

Small Wind Turbine  Enair 30PRO

The most advanced technology on the market.

The E30PRO wind turbine is designed to meet the energy demand of any home, even with low wind. Its generation and design efficiency allows us to generate energy with very low wind and, in turn, it efficiently support strong wind generation. Its production is more than 30kWh / day , with wind average between 8 and 12m/s.

The new designs have been realized strictly following the IEC61400-2 standard, innovating in techniques such as Computational Fluid Dynamics, for aerodynamic optimization. These techniques of the Aerospace industry, increase the efficiency in energy generation and cause a total absence of noise while giving great strength to the whole, turning it into a professional machine with high performance and a lifetime warranty of more than 25 years .

Diameter

3,8m


Diameter
Weight

125kg


Weight
Side

3,4m


Side
and producing

165km/h


and producing

Data sheet

Technical breakdown of the Enair 30Pro series point by point

Enair 30PRO
Number of blades 3
material of blades Glass fiber with resins and polyurethane core
Generator 250rpm nominal | Neodymium magnets
Power 3000W
Nominal power 1900W (IEC 61400-2)
Tension 24 / 48 / 220V
Wind class CLASS I / IEC 61400-2 / NVN I - A
Turning sense Schedule
Swept Area 11,34m2
Weight 125Kg
Applications Charging 24 or 48V batteries and grid connection
Wind to Start 1,8m/s.
Rated Speed 11m/s.
Speed variable pitch regulation 12m/s.
Supported Speed 60m/s
Efficient generation range From 2 to 60m/s
Type Windward horizontal windward axis rotor
Orientation Passive system with steering rudder
Power control Passive centrifugal variable pitch system with two actuation speeds
Transmission Direct
Brake Electric by short circuit and aerodynamic by variable pitch
Controller Grid connection and battery charge.
Inverter Efficiency 97%; MPPT algorithm
Noise 48db | Reduced to a minimum due to the design of the blades and the low revolutions. 1% more than ambient wind noise
Anti-corrosion protection Airtight, epoxy paint drying in high temperature furnace, generated a plastic coating
Tower Lattice, clip, tubular. Foldable or fixed variable heights according to conditions

Production charts

Power Energy

Power curve

Power (W)

Wind speed (m/s)

Annual production

Annual energy (Wh)

Wind speed (m/s)

Able to extract the maximum energy from the wind

The wind turbine Enair 30 PRO, has a large rotor diameter capable of extracting the maximum energy from the wind at low speeds, achieving its nominal power at 10m/s. After the tests of the certifications, the results for this model are highly satisfactory.

Of this model there are records of wind generation of more than 35kWh/day, which gives us a very high energy efficiency regime.

PULSE ON THE MAP AND DISCOVER YOUR PERFORMANCE

You can see the Generation´s capacity all over the world Enair 30PRO

- kWh/day Wind power


Considering the production of E30PRO

CO2 Saving

-tonnes/year

CO2 Saving

CO2 saving in tons that is avoided to throw to the atmosphere.

CO2 emission

-Seeded trees / Ha

CO2 emission

Carry out the equivalent sowing of - trees to be fixed - Ton. Of CO2 during the twenty years of their useful life.

Economic Saving

-euros/year

Economic Saving

Features

Enair Technology

To have today a 360º knowledge in all manufacturing and installation processes and also count with the support of the European Union as a partner for the development of technology, places us in a place Preferential within the market, providing efficient and above all satisfactory solutions for the end user and with the maximum level of technological development .

The most advanced technology of the wind farm

Minimum Noise

The noise is around 1% above ambient noise, being practically invaluable to our ears.

Safety-Brake

Nuevo sistema de seguridad mecánica acoplada al eje que garantiza el frenado bajo las condiciones mas adversas, para vientos incluso mayores de 70m/s.

Anticorrosive

Treated with epoxy paint it becomes to a set of anti-corrosion and antisaline ideal for islands and coasts.

Maximum efficiency

It works with a simple breeze of 2m/s and continues to run over 40m/s without losing productivity efficiency.

Remote-Control

Control combinado con el Venus de Victron que permite la marcha/paro del aerogenerador de forma remota.

Storm-Detection

Algoritmo inteligente de detección de tormentas y bloqueo de seguridad del aerogenerador totalmente automático combinado con el Dafety-Brake.

Anti-Icing and Hermetic

Uretano acrílico de resina estructural con una composición química antiadherente al hielo y de máxima resistencia para temperaturas de hasta -50°C. Sellado herméticamente, perfecto para zonas de costas o desiertos.

Hardy

In order to withstand strong winds and offer a long operating life of more than 25 years, all parts of the equipment are oversized according to the IEC61400-2 standard, this implies safety factors of 9 in many cases.

BBS (Battery Brake System)

Sistema inteligente que mide el nivel de carga de la bateria y permite detener el aerogenerador cuando la bateria llega a la tensión de consigna retomando la marcha cuando baja su carga.

Pasive Pitch Control

Pitch control operation

The active pitch control of 2 speeds is the latest technology in small wind turbine to absorb strong winds maintaining the production of energy of constant form. This patented technology has two phases, the first one that absorbs the wind gusts and another one that in case of very strong winds maintained.

Details

How it's made

Using the latest technology and the best materials.

The production of the PRO series , consist in more than 7 independent processes each carried out in different specialized centers so that we can guarantee a maximum reliability in the completion of its parts. Thus obtaining a product of great quality that meets the requeriments of the most demanding markets.

Econ

Save on your light bill in just 3 steps

Uses

Grid connected

Distributed energy generation. By means of this type of installation each dwelling can generate its own energy and sell the surplus to the electric company.

Isolated consumption

These installations are used when there is a great cost or difficulty to bring the power of the electricity grid to the place necessary for its consumption.

Water pump

One of the main characteristics and novelties of this new generation of wind turbines is the possibility of obtaining a water extraction by means of a direct pumping.

Outstanding facilities

One phase installation 100% renewable in Sos del Rey Católico

One phase installation 100% renewable in Sos del Rey Católico

Aragón

Installation designed for self-supporting renewable energy based telecommunication antennas combining the sun and wind as primary energy sources and supported by a diesel generator to cover low resource moments.

Daily energy (kWh): 0

Sustainable Livestock industry

Sustainable Livestock industry

Lugo

The sustainable livestock industry is equipped with 100% Enair technology that provides an entire livestock facility with renewable energy and becomes totally sustainable self-supplying energy.

Daily energy (kWh): 16.8

Renewable Installation in Ghana

Renewable Installation in Ghana

Republic of Ghana, West Africa

Daily energy (kWh): 22,9

Contact us